Starting Specification of Crown
narrow boats
available from 45 to 65 feet
Shell: by Reeves Boatbuilders,
complete with bow flares, raised cants to fore and aft decks, centre
mooring eye, tee stud to bow and rope dollies to stern, steel rear doors,
inset fender eyes and sacrificial anodes. Rubbing strakes are welded
top & bottom. The rear hatch can be a larger size for easy access
and to accommodate extra crew. Side doors are fitted in the galley
area to feed the ducks.
Also included are pole & plank rack, bow lockers in front well deck
and safety cabin edge hand rails.
Interior: Bilge area is
treated with Waxoyl and ballasted with new 2’x2’ paving slabs, floor
is 3” x 2” tanalised timber floor bearers fixed to give good air flow,
decking is 18mm far eastern ply . All battening is tanalised timber
and the whole of the cabin area is insulated with 25mm polyurethane
spray foam, NOTE this is the only insulation method that creates a vapour
barrier.
Engine: Beta Marine to
suit boat length,with 3 year warranty.
Tanks: 100 gal. stainless
steel for fresh water under fore deck and integral 65 gal. diesel
tank in stern.
Windows: Windows & Portholes
to customers choice in Satin Anodised Aluminium finish. Powder coating,
gold anodising and large panes in laminated glass for security are available.
Front doors in solid oak
with laminated glazing.
Vents: Brass mushroom vents
giving high level ventilation, with low level ventilation through vents
fore & aft, ducted through cabin linings to minimise draughts & give
under floor ventilation.
Paneling& doors: Linings
are oak or ash (or other veneer) faced ply with solid hardwood lippings
hand finished with satin lacquer. All joinery, including the cabinet
doors are made by us and we can supply any style you require.
Saloon: Fitted cupboards
to take TV/sound system, large open plan area for free standing furniture.
Galley: Fitted Stoves 500-DIT
T3 cooker, 12V 4 cu.ft. fridge, laminate surface hard wood edged worktops
and stainless steel sink unit with cupboards under, breakfast bar &
2 bar stools.
Bathroom: Fully tiled shower
with domestic size 760 x 760mm shower tray with bi-fold glass door,
& thermostatically controlled shower, automatic shower drain
pump & ventilation fan. Thetford cassette toilet with electric flush
& ventilation fan above. Vanity unit with ceramic inset basin
& monobloc mixer tap. Fitted laundry basket with storage shelves above,
space behind for spare cassette. Small radiator.
Bedroom: Fixed double bed
with interior sprung mattress, 2 large storage areas accessible from
the front with further large storage area under bed accessed from removable
slat panels.Two storage cupboards over bed with concealed reading lights.
Full height double wardrobe.
Flooring: Carpet tiles
are fitted in the bedroom, through to the galley & saloon and non-slip
vinyl is fitted in the bathroom & engine room.
Heating: Eberspacher diesel
fired boiler feeding concealed fin rads. & twin coil calorifier.
Electrics: 1 engine starting
battery plus 4 domestic batteries. Custom Built 12V circuit breaker
panel serving all power & lighting. Power outlets for fridge, pumps
etc. Recessed downlighters to saloon, galley and bathroom. All cabling
is designed and sized for low volt drop. 240V shoreline installation
including 30mA RCD protection, 3 twin brass switched sockets.
Phew, you got this far .......
just a reminder .... we do build to your layout and requirements.....
we hope the above gives an indication of the level of fit out you can
expect from us.